Catch-all email verifier: find out if a catch-all address is valid
A catch-all domain says yes to every address, so most email verifiers mark these emails "risky" or "accept-all". Paste an address into this free catch-all email checker. It runs catch-all email verification on the mailbox and returns valid or invalid, with 98.5% accuracy. It also verifies mailboxes behind SEGs like Mimecast and Proofpoint, which other tools mark as unknown.
Mailbox Verification
Ready to verify mailbox
Enter a corporate or consumer address in the console input to check whether the mailbox exists.
No signup, no card. One address per check.
Need to check a whole list? Create an account and get 1,000 free credits. No card needed.
Giggal.ai is rated a Leader on SourceForge and Slashdot
Whole Lists
Verify catch-all emails in a whole list
When you upload a list, turn on Include Catch-All Verification. The catch-all addresses in the Risky column are then checked one by one. Each one moves to deliverable or undeliverable.
Try the toggle on the example list to see the change. Running a list full of gateways? See how we verify emails protected by SEG gateways.
- 1,000 free credits
- No card needed
- Credits never expire
On a typical list, around 30% of emails sit on catch-all domains. We verify each one and most turn out to be valid.
The Background
What is a catch-all email domain?
A catch-all domain accepts email for every address, even addresses that do not exist. The domain is the part after the @. Take the domain company.example. If it is catch-all, its mail server accepts ann@company.example, sales@company.example and qx7z41@company.example. It says yes to all three, even if only Ann is a real person.
Companies set this up so they never miss an email, for example when a sender misspells a name. On a typical sales or marketing list, around 30 percent of contacts sit on catch-all domains.
Most verification tools see this setup and stop. They label every address on it as risky or accept-all. That leaves two options. You can send and risk bounces, spam traps and a damaged sender reputation. Or you can delete the contacts and lose real customers.
Catch-all and accept-all mean the same thing
Some verifiers mark these emails "accept-all", others "risky". The setup itself is called catch-all, catchall or accept-all. All three names describe a mail server that returns 250 OK for any recipient. 250 OK is the server's code for "I accept this email". Whatever label your last tool used, catch-all verification checks the same thing.
If you are new to the term, our blog covers what a catch-all email address is in plain language. To check any address, catch-all or not, use the free email checker.
The Problem
Why a normal email verifier cannot check a catch-all address
An email verifier checks a mailbox by talking to the mail server. It does not send an email. It asks the server one question: "Do you accept mail for this address?" Here is what happens with company.example.
- 1The verifier asks about ann@company.example. The server answers 250 OK.
- 2The verifier asks about qx7z41@company.example, an address nobody uses. The server also answers 250 OK.
- 3Both answers are the same. So the yes for Ann does not prove that her mailbox exists.
This is why a standard check marks these addresses as risky or accept-all. The server never says no, so the check has nothing to go on. Real catch-all email verification needs more signals than the server's yes.
Detection
How a catch-all domain is detected
Detection is the first step. It tells you that the domain is catch-all. It does not tell you whether the address is real.
- 1
Find the mail server
The verifier looks up the domain's MX record. This is the DNS entry that names the server that receives the domain's email.
- 2
Ask about a made-up address
It asks that server about a random address that cannot exist, such as qx7z41@company.example. No email is sent.
- 3
Read the answer
If the server rejects the made-up address, the domain is not catch-all, and a normal mailbox check works. If the server accepts it, the domain is catch-all.
Detected vs Verified
Catch-all detected vs catch-all verified
Many tools do the detection step and stop. Their result says "risky" or "accept-all" and leaves the choice to you. A catch-all verifier goes one step further. It checks whether the mailbox itself is real and returns valid or invalid.
How email verifiers handle catch-all and gateway addresses
| What the tool does | What you see | What you can do with it |
|---|---|---|
| Detects the catch-all domain and stops | "Risky" or "accept-all" | You have to guess. Send and risk bounces, or delete contacts who may be real. |
| Cannot get past a Secure Email Gateway (SEG) | "Unknown" | The tool cannot even tell whether the domain is catch-all. You learn nothing about the address. |
| Gives a risk score | A number, for example 60 out of 100 | You pick a cut-off yourself. A score is not proof that the mailbox exists. |
| Verifies the mailbox (Giggal.ai) | "Valid" or "invalid" | Works for catch-all domains and for addresses behind a gateway. Send to the valid ones. Remove the invalid ones. |
How It Works
How Giggal.ai verifies catch-all emails
Every catch-all address goes through three checks. They combine into one result: valid or invalid. You do not get a technical report to read.
Mailbox check
We check whether the mailbox itself exists, not only whether the domain accepts mail. A standard check gets a general yes from the server and stops. We keep checking until we have a result.
Domain trust signals
We look at how the domain is set up: its SPF, DKIM and DMARC records, its SSL certificate and its hosting. A domain that is set up properly is more likely to have real mailboxes.
Email gateway handling
Some addresses sit behind a Secure Email Gateway such as Mimecast, Proofpoint or Barracuda. Other tools cannot see past the gateway, so they mark these addresses as unknown. We verify them directly.
Example
Catch-all results: a typical verifier vs Giggal.ai
The same example list of 48,028 emails, checked two ways.
10,480 contacts you cannot safely send to. They are all on catch-all domains. In this example, around 80 percent of them are real, but the result does not say which ones.
In this example, 8,384 more contacts move from risky to valid. Every address gets a valid or invalid result.
Results
What each catch-all verification result means
Each address on a catch-all domain ends in one of these results.
| Result | What it means | What to do |
|---|---|---|
| Valid | The mailbox exists, so mail sent to it should arrive. | Keep it and send. |
| Invalid | No real mailbox sits behind the address, even though the server said yes. | Remove it. Mail sent there can bounce later or go unread. |
| Unknown | Rare. We could not get a clear answer, for example because the server did not respond. | Try again later. The credit is refunded. |
| Risky or accept-all (from another tool) | The other tool found a catch-all domain but did not check the mailbox. | Verify those addresses here to get valid or invalid. |
| Unknown (from another tool) | Usually an address behind a Secure Email Gateway. The other tool could not even tell whether the domain is catch-all. | Verify those addresses here to get valid or invalid. |
In the App
Two ways to run catch-all verification
Inside the app, the catch-all email verification tool works in two ways. Both cost 1 credit per email.
During bulk verification
When you upload a list to the bulk email verifier, turn on the Include Catch-All Verification toggle. Every regular and catch-all address is checked in one run, at a flat 1 credit per email. The catch-all checks run alongside the regular ones, so your list finishes in the same time.
As a standalone Catch-All Detection task
Already ran a list without catch-all verification? Open Catch-All Detection in your dashboard. Paste or upload only the catch-all addresses, and verify just those at the same 1 credit per email.
Existing Lists
What to do with catch-all emails you already have
Maybe another tool cleaned your list. It marked the catch-all addresses as risky or accept-all, and the addresses behind email gateways as unknown. You do not need to verify the whole list again. Verify catch-all emails only, in three steps.
- 1Export only the rows marked risky, accept-all or unknown.
- 2Open Catch-All Detection in your Giggal.ai dashboard. Upload that file or paste the addresses.
- 3Download the results. Keep the valid addresses and remove the invalid ones.
Until you verify them, do not send to these addresses in one large batch. Many bounces from one send can hurt your domain reputation. You can check your numbers with the bounce rate calculator.
Email Gateways
Catch-all verification behind Mimecast, Proofpoint and Barracuda
A Secure Email Gateway (SEG) is a filter in front of a company's mailboxes. Mimecast, Proofpoint and Barracuda are common examples. The gateway receives the mail first and checks it for spam and threats.
A normal email verifier cannot see past the gateway. It cannot even tell whether the domain is catch-all or not, so it marks these addresses as unknown. A catch-all email verifier like Giggal.ai checks these addresses too and returns valid or invalid, for the same 1 credit per email.
Read more about SEG email verification and Mimecast email verification.
Who Uses It
Who uses a catch-all email verifier
Cold outreach teams
Send only to verified contacts. Fewer bounces keep your sending domain in good standing.
Marketing agencies
Verify every client list with the same catch-all email verifier, so results and reports stay consistent.
Sales operations
Keep your CRM full of contacts that really receive your sequences and product updates.
Newsletter publishers
Remove addresses that look real but never receive mail, so your open and click rates stay accurate.
Pricing
Catch-all verification pricing: 1 credit per email
Every email verification costs exactly 1 credit, including catch-all, accept-all and SEG-protected addresses. There are no monthly minimums, and credits never expire. For example, 10,000 credits cost $9.90.
- Standard addresses
- Catch-all and accept-all domains
- SEG-protected mailboxes
- Unknown results refunded
Weighing this against another tool? See how Giggal.ai compares to other verifiers.
FAQ
Catch-all email verification FAQ
A catch-all domain accepts email for every address, even addresses that do not exist. Its mail server says yes to any address, so a normal check cannot tell whether a real mailbox is behind it.
It means the domain accepts every address, so the check could not confirm the mailbox. Most tools then mark the address as "risky" or "accept-all". A catch-all email verifier checks further and returns valid or invalid.
Yes. A standard check cannot, because the server says yes to every address. Giggal.ai uses mailbox, domain and gateway signals to return valid or invalid. You can verify catch-all emails one at a time, free, with the catch-all email checker on this page.
Yes. Catch-all, catchall and accept-all are three names for the same setup. The mail server accepts mail for any address at the domain. Different email verifiers just use different labels.
Not before you verify it. Some of these addresses are real and some are not. Mail to a fake one can bounce or go unread, and a high bounce rate hurts your sender reputation. Verify first, then send to the valid ones.
Because the mail server said yes to every address, including made-up ones. The tool cannot tell a real mailbox from a fake one, so it marks the address risky or accept-all and stops. Upload those addresses to a catch-all verifier to get a valid or invalid result for each one.
Usually because the address sits behind a Secure Email Gateway such as Mimecast, Proofpoint or Barracuda. The gateway hides the mailbox, so the tool cannot even tell whether the domain is catch-all. Giggal.ai verifies these addresses and returns valid or invalid.
No. Catch-all verification costs a flat 1 credit per email, the same as a standard verification.
Around 98.5% on standard business lists. The result is based on whether the mailbox exists, not only on the server’s first answer, so it is the result that holds up when you send.
Yes. Open Catch-All Detection in your dashboard, paste or upload only the addresses you want to check, and verify just those. Standalone checks cost the same flat 1 credit per email.
That is rare. If we cannot reach a result, the credit is refunded automatically. You only pay for verifications we can complete.
Verify catch-all emails free
1,000 free credits, no card needed. A catch-all check costs the same 1 credit as any other address.
